How to get algae out of the pool without a vacuum in cheap & effective way

Introduction of How to get algae out of the pool without a vacuum

A pool may enhance your social value as well as the worth of your home. But cleaning a pool is not an easy task at all. Poor circulation and low or inconsistent chlorine levels can increase pool algae. An enormous number of algae can breed harmful bacteria and this type of bacteria results in skin rashes and other health risks.

Also, dirty and contaminated water can cause recreational water illnesses (RWIs) these include diarrhea, ear infections, respiratory infections, rashes, and inflamed eyes or lungs.

The first thing that comes to mind while thinking about cleaning a pool is a vacuum. Though it is the best way to clean a pool, you wonder how much time and money it takes! Around 80-120$ for weekly service or 108-1032$ per year is expected to spend on cleaning through a vacuum, which is not a budget-friendly process.

So, now maybe you are thinking “How to clean your pool and get the algae out easily and on a budget without vacuuming?” Don’t worry in this article, I will talk about some cheap and effective ways to clean your pool. Stay tuned to know how to clean your beautiful pool clean and make the pool water shine like crystal!

Doses of Shock

The purpose of shocking your swimming pool is to make water ultra-chlorinated, eliminate chloramines, and eradicate germs from the water. The ideal time to do so is at the start of the swimming season and after intensive exercises, such as a pool party.

Shocking your pool should be part of your weekly or bi-weekly maintenance to keep it healthy and attractive. Following this routine servicing will prevent the growth of algae and germs, ultimately preventing you from having hazy water.

Read Also: How to Avoid a Root Canal

To shock your pool:

  • Test the water using a water test kit to ensure that the pH level is in the proper range.
  • Circulate the water.
  • Read the instructions written on the packet of the shock kit.
  • Apply the shock kit or chlorine cleaner directly to pool water as needed.
  • Wait for six hours.
  • Re-test the water. If the water is 1-4 ppm, then it is safe.

Flocculation

Flocculant or floc is a chemical or cleaning agent used to clean the pool when no other way especially vacuuming isn’t an option. Floc is a simple process, when you decide to floc all you need to do is:

  • Increase the water level first so that there is no shortage of water.
  • Balance the pH level to 7.0 thus you can be assured that the sanitization will work at its best.
  • Mix the flocculant with 5 gallons of water.
  • Pour the mixture into the pool water.
  • Run the pump and let the floc disperse to every corner of the pool.
  • Turn the pump off and wait overnight.
  • Set the filter valve to “waste”.
  • Switch on the pump to filter the floc out.
  • Replace the water.
  • Clean the pool filters to get all the leftover chemicals out.

Use Algaecide

Use Algaecide

Algaecide may kill the white-water mold that has developed on the surface of your pool water as well as the pink slime that has attached itself to the pool walls and floor. Using algaecide, whether you have a chlorine or a biguanide pool, will substantially enhance the appearance and health of your pool.

  • First clean your filter and get all the debris out.
  • Balance your pool water from 7.4-7.6 ppm.
  • Add three to four gallons of oxidizer per 10,000 gallons of water
  • Use a brush to clean your pool walls thoroughly.
  • Switch on the pump and run overnight.
  • Brush the pool walls and filter again.
  • Re-test the water to check if the water is balanced.

Baking soda is the most common homemade cleaning agent:

Baking soda

Chlorine is good for pool water but adding too much to the water can cause so many problems. It can lower the pH level and alkalinity. If the alkalinity falls too low you can use homemade DIY to balance the pH level, which is sodium bicarbonate also popularly known as baking soda. Baking soda consists of pH levels of 8 and adding this to your pool will raise both pH and alkalinity.

To use baking soda:

  • Check your pool water using a water test kit, if the alkalinity level is less than 80ppm then you will need to raise the level to 110-150 ppm.
  • Add 1.5 lbs. of soda for every 10,000 gallons of water.
  • Wait for six hours.
  • Re-test the water.

How to prevent algae in the first place?

If you have read this far, then you know how difficult it is to get algae out from your pool. As we know “Prevention is better than cure”, here are some basic tips to keep your pool away from algae.

  •         Clean your pool regularly.
  •         Check your pool’s circulation system regularly.
  •         Always keep sanitizing the pool water.
  •         Test water with a water testing kit.
  •         Scrub the pool walls and pipes every week.
  •         Balance the chlorine to prevent alkalinity.

Why should the pool be cleaned regularly?

In the summertime, people are intended to use the pool more often. This is why it is a must to keep your pool clean. It’s important to clean your pool every 2-3 days. Otherwise, if somehow you fail to clean your pool for a week or two it can cause so many problems.

Especially without proper cleaning, your pool will become home to many bacteria and germs along with algae. Later these micromaterials will cause a lot of diseases like Gastrointestinal diseases, skin, eye, and ear infections, respiratory failures. Moreover, because of algae, the wall of the pool becomes slipper.

Because of the slipper walls, one can easily lose balance and fall over the face and can cause major structural damage like a broken jaw or hip joint. Sometimes structural damage can be the reason for internal bleeding which threatens life. So, for all these dangerous consequences it’s better to clean the pool every other day.

Conclusion

There are so many products and tools as well as some effective homemade remedies are available to get the algae out without vacuuming. But in today’s world, we are so busy with our lives that we often don’t have enough time to clean our pool.

In that case, it’s wise to clean the pool regularly whenever you see any dirt in the water. Or, you can just save your time and money both by following the processes I discussed above.

Spending time in a pool refreshes your mind and swimming increases your heart rate. Remember, a clean pool can make your leisure and family time safer and more beautiful!

To get more information visit our homepage Adviserking.com

Leave a Comment